Elemental analysis of soils from Toshki by using instrumental neutron activation analysis techniques

Instrumental neutron activation analysis has allowed performing a complete characterization of the chemical composition of thirty soil samples soil samples from ten locations collected from the Toshki area in Upper Egypt. The samples were irradiated with thermal neutrons at the Mainz TRIGA research reactor. Gamma-ray spectra were recorded using a high efficiency HPGe detector to determine the contents of major, minor and trace elements in these samples. As a result of the analysis, altogether 32 elements were identified qualitatively and quantitatively. These elements are: Al, As, Ba, Ca, Ce, Co, Cr, Cs, Eu, Fe, Ga, Hf, K, La, Lu, Mg, Mn, Na, Nb, Nd, Rb, Sc, Sm, Sn, Ta, Ti, Th, U, V, Yb, Zn and Zr. In several cases, X-ray fluorescence analysis was used for comparison. The results obtained for U and Th were compared with data reported in literature.     

Rate Coefficients of C1 and C2 Criegee Intermediate Reactions with Formic and Acetic Acid Near the Collision Limit: Direct Kinetics Measurements and Atmospheric Implications

Rate coefficients are directly determined for the reactions of the Criegee intermediates (CI) CH₂OO and CH₃CHOO with the two simplest carboxylic acids, formic acid (HCOOH) and acetic acid (CH₃COOH), employing two complementary techniques: multiplexed photoionization mass spectrometry and cavity‐enhanced broadband ultraviolet absorption spectroscopy. The measured rate coefficients are in excess of 1×10^?10 cm³ s^?1, several orders of magnitude larger than those suggested from many previous alkene ozonolysis experiments and assumed in atmospheric modeling studies. These results suggest that the reaction with carboxylic acids is a substantially more important loss process for CIs than is presently assumed. Implementing these rate coefficients in global atmospheric models shows that reactions between CI and organic acids make a substantial contribution to removal of these acids in terrestrial equatorial areas and in other regions where high CI concentrations occur such as high northern latitudes, and implies that sources of acids in these areas are larger than previously recognized.     

Photoprotective effects of bucillamine against UV-induced damage in an SKH-1 hairless mouse model

UVB exposure of skin results in various biologic responses either through direct or indirect damage to DNA and non-DNA cellular targets via the formation of free radicals, reactive oxygen species (ROS) and inflammation. Bucillamine [N-(2-mercapto-2-methylpropionyl)-l-cysteine] is a cysteine-derived compound that can replenish endogenous glutathione due to its two donatable thiol groups, and functions as an antioxidant. In this study, we investigated the effects of bucillamine on UVB-induced photodamage using the SKH-1 hairless mouse model. We have demonstrated that UVB exposure (two consecutive doses, 230 mJ cm(-2)) on the dorsal skin of SKH-1 mice induced inflammatory responses (edema, erythema, dermal infiltration of leukocytes, dilated blood vessels) and p53 activation as early as 6 h after the last UVB exposure. Bucillamine pretreatment (20 mg kg(-1) of body weight, administered subcutaneously) markedly attenuated UVB-mediated inflammatory responses and p53 activation. We have also demonstrated that the stabilization and upregulation of p53 by UVB correlated with phosphorylation of Ser-15 and Ser-20 residues of p53 protein and that bucillamine pretreatment attenuated this effect. We propose that bucillamine has potential to be effective as a photoprotective agent for the management of pathologic conditions elicited by UV exposure.     

A Targeted Review of Current Progress,Challenges and Future Perspective of g-C3N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.     

Interaction of glycine with cationic, anionic, and nonionic surfactants at different temperatures: a volumetric, viscometric, refractive index, conductometric, and fluorescence probe study

A number of thermodynamic parameters viz. apparent molar volumes, ϕ _v , partial molar volumes, , transfer volumes, , Falkenhagen coefficients, A, Jones–Dole coefficients, B, free energies per mole of solute, , and per mole of solvent, , molar refraction, R _D , and limiting molar conductivity, , have been calculated by using the experimentally measured densities, ρ, viscosities, η, refractive indices, n _D , and specific conductivities, κ, data of glycine (0.02–0.10 m) in 0.01 m aqueous sodium dodecyl sulphate, cetyltrimethylammonium bromide, and triton X-100 (TX-100) solutions at 298.15, 303.15, 308.15, and 313.15 K. The above calculated parameters were found to be sensitive towards the interactions prevailing in the studied amino acid–surfactant–water systems. Moreover, fluorescence study using pyrene as a photophysical probe has also been carried out, the results of which support the conclusions obtained from other techniques.     

苯乙烯与邻、间、对-二甲苯二元混合液的分子间相互作用

The densities (ρ), ultrasonic speeds (v), and refractive indices (n) of binary mixtures of styrene (STY)with m-, o-, or p-xylene, including those of their pure liquids, were measured over the entire composition range at the temperatures 298.15, 303.15, 308.15, and 313.15 K. The excess volumes (VE), deviations in isentropic compressibilities(△ks), acoustic impedances (△Z), and refractive indices (△n) were calculated from the experimental data. Partial molar volumes (V0φ,2) and partial molar isentropic compressibilities (K0φ,2) of xylenes in styrene have also been calculated. The derived functions, namely, VE, △ks, △Z, △n, V0φ,2, and K0φ,2 were used to have a better understanding of the intermolecular interactions occurring between the component molecules of the present liquid mixtures. The variations of these parameters suggest that the interactions between styrene and o-, m-, or p-xylene molecules follow the sequences: p-xylene＞o-xylene＞m-xylene. Apart from using density data for the calculation of VE, excess molar volumes were also estimated using refractive index data. Furthermore, several refractive index mixing rules have been used to estimate the refractive indices of the studied liquid mixtures theoretically. Overall, the computed and measured data were interpreted in terms of interactions between the mixing components.     

Dual solutions of time-dependent magnetohydrodynamic stagnation point boundary layer micropolar nanofluid flow over shrinking/stretching surface

Time-dependent, two-dimensional(2 D) magnetohydrodynamic(MHD)micropolar nanomaterial flow over a shrinking/stretching surface near the stagnant point is considered. Mass and heat transfer characteristics are incorporated in the problem. A model of the partial differential expressions is altered into the forms of the ordinary differential equations via similarity transformations. The obtained equations are numerically solved by a shooting scheme in the MAPLE software. Dual solutions are observed at different values of the specified physical parameters. The stability of first and second solutions is examined through the stability analysis process. This analysis interprets that the first solution is stabilized and physically feasible while the second one is un-stable and not feasible. Furthermore, the natures of various physical factors on the drag force, skin-friction factor, and rate of mass and heat transfer are determined and interpreted. The micropolar nanofluid velocity declines with a rise in the suction and magnetic parameters, whereas it increases by increasing the unsteadiness parameter.The temperature of the micropolar nanofluid rises with increase in the Brownian motion,radiation, thermophoresis, unsteady and magnetic parameters, but it decreases against an increment in the thermal slip constraint and Prandtl number. The concentration of nanoparticles reduces against the augmented Schmidt number and Brownian movement values but rises for incremented thermophoresis parameter values.     

One-pot access to indolo[2,3-b]quinolines by electrophile-triggered cross-amination/Friedel-Crafts alkylation of indoles with 1-(2-tosylaminophenyl)ketones

Activation of C2 and C3 of indoles by molecular iodine (I(2)) and base followed by in situ reaction with 1-(2-tosylaminophenyl)ketones or 2-tosylaminobenzaldehyde can afford highly substituted indolo(2,3-b)quinolines in moderate to excellent yields (up to 99%). The reaction provides a metal-free selective difunctionalization of indoles. The synthetic potential of the protocol has been illustrated by the synthesis of neocryptolepine and its 11-methyl analogue.     

Variation in antioxidant attributes at three ripening stages of guava (Psidium guajava L.) fruit from different geographical regions of Pakistan

The present investigation was carried out to appraise the levels of total phenols and vitamin C as well as antioxidant potential at three different ripening stages (un-ripe, semi-ripe and fully-ripe) of guava (Psidium guajava L.) fruit collected from three different geographical regions of Pakistan (Islamabad, Faisalabad and Bhakkar). The antioxidant potential of guava fruit extracts was assessed by means of different in-vitro antioxidant assays, namely inhibition of peroxidation in linoleic acid system, reducing power and radical scavenging capability. Overall, fruit at the un-ripe stage (G1) exhibited the highest levels of TPC, TFC, reducing power and DPPH radical scavenging activity, followed by the semi-ripe (G2) and fully-ripe (G3) stages. On the other hand, vitamin C content increased as the fruit maturity progressed, with highest value seen at the fully-ripe stage (G3) followed by the semi-ripe (G2) and un-ripe stage (G1). The concentration of vitamin C in fruits varied as: Faisalabad (136.4-247.9 mg 100 g?1), Islamabad (89.7-149.7 mg 100 g?1) and Bhakkar (73.1-129.5 mg 100 g?1). The results showed that different stages of maturation and geographical locations had profound effects on the antioxidant activity and vitamin C contents of guava fruit.     

Optimized and validated initial-rate method for the determination of perindopril erbumine in tablets

A simple and sensitive kinetic spectrophotometric method for the determination of perindopril in pharmaceutical preparations is described. The method is based on the interaction of drug with 1-chloro-2,4-dinitrobenzene (CDNB) in dimethylsulfoxide (DMSO) at 40+/-1 degrees C. The reaction is followed spectrophotometrically by measuring the rate of change of the absorbance at 420 nm. Under the optimized experimental conditions, the calibration curve showed a linear relationship over the concentration range of 20-140 microg/ml. The activation parameter such as E(a), deltaH*, deltaS* and deltaG* for this reaction were calculated and found to be 27.31 kJ/mol, 24.69 kJ/mol, -138.84 J/K/mol and 61.50 kJ/mol, respectively. The method has been successfully applied to the determination of perindopril in commercial dosage forms. Statistical comparison of the results with the Abdellatef's spectrophotometric method shows excellent agreement and indicates no significant difference between the methods compared in terms of accuracy and precision.